Universal Products

Synergy Double Adjuster Tube Adapter

Brand: Synergy Manufacturing
Product Code(s): 3620-07-14-10 3620-07-18-10 3620-10-11 3620-12-13 3620-12-14
Shipping Weight: 2.50 lbs
Shipping Dimensions: 2.00 x 6.00 x 2.00
Availability: In Stock
Price: $45.00

Available Options

* Tube Adapter:
   - OR -   

Synergy Double Adjuster Tube Adapter

  • The Synergy Double Adjuster Tube Adapter is designed to eliminate the need for jam nuts that are normally used when building link suspension & steering systems
  • The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal
  • The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster sleeve
  • Ideal for link suspension designs with weld on bushings/joints at one end or bent suspension links
  • The weld on tube adapter is made from solid stock 1018 Steel
  • The tube adapter seals the link off from water or other debris entering the link which can cause damage over time
  • An integrated drain hole lets any water that enters the threads of the adapter drain out

Part #:

Part #   Description Additional Cost
3620-07-14-10 Double Adjuster Tube Adapter, 7/8"-14 Left Hand Thread, 1" ID Tube $0.00
3620-07-18-10 Double Adjuster Tube Adapter, 7/8"-18 Left Hand Thread, 1" ID Tube $0.00
3620-10-11 Double Adjuster Tube Adapter, 1"-14 Left Hand Thread, 1-1/8" ID Tube $5.00
3620-12-13 Double Adjuster Tube Adapter, 1-1/4" - 12 Left Hand Thread, 1-3/8" ID Tube $5.00
3620-12-14 Double Adjuster Tube Adapter, 1-1/4" - 12 Left Hand Thread, 1-1/2" ID Tube $5.00



  • (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes
  • (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End
  • (1) Pinch Bolt Hardware
  • All Adjusters Use A Left Hand Threaded Rod End or Johnny Joint


Installation Requires (1 Hour):



Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: