Universal Products

GenRight "Builders" Drag Link Mount for Hi Steer Arm

Brand: GenRight Off Road
Product Code(s): STK-2510
Shipping Weight: 3.00 lbs
Shipping Dimensions: 6.00 x 6.00 x 4.00
Availability: In Stock
Price: $59.95
   - OR -   

This is the GenRight Drag Link Mount to correct the angle issues inherent in hi-steer set ups. We create a strong mount with double shear using a 5/8" Grade 8 bolt. This is a perfect compliment to all long travel suspensions and is designed to be used with hi-steer type arms. This Heavy Duty kit will hold up to big tires and off-road abuse. Got a hydraulic ram? It will work with that too.

Still not sure you need this? You will find this product on every one of our GenRight Jeeps!
 
Included:
  • Laser cut pieces from 1/4" thick steel.
  • Design is puzzled together for easy assembly.
  • 5/8-18 Grade 8 mounting hardware.
  • Why Heim rod ends? We prefer the heims over the standard or heavy duty "tapered style" tie rod ends because, over the years we have seen the taper on the tie rod end SPLIT too many steel knuckles! This is the exact same steering set up we have used on our Gen-Right rigs for years, and it works great!
 
Notes:
  • This kit requires welding of the pieces together while installing them onto your Hi-Steer arm.
  • Requires a 7/8 shank x 3/4" bore heim rod end with 5/8" I.D. high misalignment spacers (sold separately). 
  • This kit requires moving the axle side trac bar mounting location to match the new higher drag link position!!!
  • Once installed, you must cycle the front suspension and steering to make sure the high misalignment heims do not exceed their range of motion, which would damage the steering components!

 

Installation Requires (2+ Hours):

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Products you may also be interested in: