Universal Products

Rugged Ridge Jeep TJ 97-02 4" ORV Lift Kit with Shocks

Rugged Ridge Jeep TJ 97-02 4" ORV Lift Kit with Shocks
Brand: Rugged Ridge
Product Code(s): 18415.40
UPC: 804314165642
Shipping Weight: 139.00 lbs
Shipping Dimensions: 22.00 x 13.00 x 13.00
Availability: In Stock


Price: $832.99
   - OR -   

The 4” coil kit is designed for more severe off road use and up to a 34” x 12.5” x 15” tire.

  • Get off road performance while not sacrifi cing on road ride! This kit will provide as close to factory a ride as you can get while providing off road articulation.
  • Includes four powder coated, E-coated 5160H hot rolled bar, 5/8” coil springs that are set to original factory rates. By using 5160H hot rolled bar, ORV springs keep their memory eliminating any possibility of future sag.
  • By setting the coil springs to factory rates, you get the best on road ride possible and the ability to use a larger tire.
  • ORV uses tough, over built extended control arms for added strength and higher performance. Each arm has a beefy 3/16” wall thickness and each end is tapered before welding: this extra heavy-duty design ensures a long life, both on and off road.
  • In most cases control arms are longer than factory to adjust for caster. This is not always true for other brand lifts! Each arm bushing can be easily greased without removing the arm from the vehicle.
  • Each 4” Coil Spring Lift Kit includes 1.5” transfer case lowering brackets. These are not spacers but full length brackets that actually “true” your transfer case. ORV uses these brackets rather than spacers, as spacers can create fl ex therefore putting undue stress on the drive line.
  • All 4” Kits will require the purchase of a drop pitman arm to ensure proper steering geometry (sold separately).
  • Kit includes two sway bar disconnects for more off road articulation.
  • All ORV Kits with shocks include a pair of Neoprene Wrapped Grab Handles and an Off Road Organizer for your glove box!

Includes:

  • (4) coil springs.
  • (4) lower links.
  • Track bar relocation bracket.
  • (2) transfer case lowering brackets.
  • (2) transmission lowering brackets
  • Hardware kits.

 

Installation Requires (5-8 Hours):

 
 

 

Jeep
Wrangler TJ 97-02

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Products you may also be interested in: