The Currie Antirock® rear sway bar kit, when used in conjunction with a front Antirock® sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock® off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicle's axle housing. The Currie Antirock® sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street, however, it will not provide the same performance as the stock setup.
Please indicate 2 door or 4 door JK and steel or aluminum arms.
|Part #||Description||Additional Cost|
|CE-9900JKR||2 Door JK with Steel Arms||$0.00|
|CE-9900JKRA||2 Door JK with Aluminum Arms||$40.00|
|CE-9900JKR4||4 Door JK with Steel Arms||$0.00|
|CE-9900JKR4A||4 Door JK with Aluminum Arms||$40.00|
Installation Requires (2-3 Hours):
|Wrangler JK 2DR|
|Wrangler JK 4DR|